FleXD
From E3D-Online
This Wiki is not looked after anymore :( Please navigate to
e3d-online.dozuki.com
for up to date and improved documentation
e3d-online.dozuki.com
for up to date and improved documentation
FleXD is a TPU with hardness Shore 93A. It's bouncy yet firm, suitable for all kinds of fun applications as well as for printing gaskets, tyres, seals, and ice trays. Spool weight: 500g
Print Guidelines
- Bed Temp | 80°C+
- Brass Nozzle Temp | 220°C
- Bed Adhesion | Glue stick on glass, no additional adhesive needed on PEI sheeting or blue tape.