MatX

From E3D-Online
Jump to: navigation, search
This Wiki is not looked after anymore :( Please navigate to
e3d-online.dozuki.com
for up to date and improved documentation

Mechanical Properties

  • Flex Modulus | 21,600 kfg/cm²
  • Elongation to break | 23%
  • Izod impact strength | 118J/m
  • Tensile Strength | 460 kgfcm²
  • Water Absorption | None
  • Hardness (Rockwell Scale) | 105

Thermal Properties

  • Heat Deflection Temperature | 85°C
  • Bed Temp | 105°C - 120°C
  • Brass Nozzle Temp | 240°C
  • Bed Adhesion | Glue stick on glass, Dimafix adhesive.

General

Description

ASA-based material for 3D printing. Replacement for uses where ABS strength and toughness profiles are required. Offers standard ASA-related benefits such as good chemical, heat, and UV resistance. Additionally developed for good flow properties, inter-layer adhesion, and smooth surface finish in 3D printing

Additional Notes

Acrylonitrile rubber bound in an acrylonitrile-styrene copolymer matrix, forms a weak bond with styrene-based support material e.g. Scaffold Snap when 3D printed together.