Single & Dual Direct-Drive IR Sensor Bracket

From E3D-Online
Jump to: navigation, search
This Wiki is not looked after anymore :( Please navigate to
e3d-online.dozuki.com
for up to date and improved documentation
IR SENSOR ASSEMBLY.jpg


IR Sensor.

The IR Sensor.

Picture of an assembled IR sensor.

Insert IR sensor with prongs facing up and on the ‘higher’ side of the bracket. Screw together.

It is worth checking now that the IR sensor mount moves smoothly in the slots on the X-Carriage as the sensor has to be moved up and down during calibration. It is very difficult to clean up the sensor mount and the X-Carriage slots once the sensor is mounted.

Note : There was an error in the fixings kit and in some instances M2.5 Hex Nuts have been supplied and not Square nuts.