ABS

From E3D-Online
Revision as of 08:46, 24 July 2017 by Clare (talk | contribs) (Printing with spoolWorks PLA)

Jump to: navigation, search
This Wiki is not looked after anymore :( Please navigate to
e3d-online.dozuki.com
for up to date and improved documentation

Guidelines

SpoolWorks ABS provides a good balance of properties at an afforable price. Low ooze and strong with a satin finish.

Printing with spoolWorks ABS

  • Print Temperature | 240°C
  • Bed Temperature | 120°C
  • Bed Adhesion | Glue stick on glass bed