ABS
From E3D-Online
Revision as of 14:13, 27 October 2017 by Ryansmithe3d (talk | contribs)
This Wiki is not looked after anymore :( Please navigate to
e3d-online.dozuki.com
for up to date and improved documentation
e3d-online.dozuki.com
for up to date and improved documentation
This Wiki is not looked after anymore :( Please navigate to
www.e3d-online.dozuki.com
for up to date and improved documentation
www.e3d-online.dozuki.com
for up to date and improved documentation
Guidelines
SpoolWorks ABS provides a good balance of properties at an afforable price. Low ooze and strong with a satin finish.
Printing with spoolWorks ABS
- Print Temperature | 240°C
- Bed Temperature | 120°C
- Bed Adhesion | Glue stick on glass bed