Difference between revisions of "DC Fans"
From E3D-Online
This Wiki is not looked after anymore :( Please navigate to
e3d-online.dozuki.com
for up to date and improved documentation
e3d-online.dozuki.com
for up to date and improved documentation
Line 17: | Line 17: | ||
Engineering drawing for axial fans, including mounting hole spacing: | Engineering drawing for axial fans, including mounting hole spacing: | ||
[[File:50x50x15mm_12v_DC_Side_Blow_Fan.pdf]] | [[File:50x50x15mm_12v_DC_Side_Blow_Fan.pdf]] | ||
+ | |||
=== Fans Leads === | === Fans Leads === |
Latest revision as of 11:22, 23 December 2016
Dimensional Drawings
Axial Fans
The following axial fans are available:
- 30x30x10 12V DC
- 30x30x10 24V DC
- 40x40x10 12V DC
- 40x40x10 24V DC
- 60x60x20 12V DC
Engineering drawing for axial fans, including mounting hole spacing: File:DC Fans.pdf
Side Blow fans
The following radial fan is also currently available:
- 50x50x15 12V DC
Engineering drawing for axial fans, including mounting hole spacing: File:50x50x15mm 12v DC Side Blow Fan.pdf
Fans Leads
Fan leads may come in 2 styles:
- New Style (quick replace), consisting of:
- Fan with 80mm lead, terminating in male Molex connector.
- Separate 1m lead with female Molex connector at one end and 2x1 Dupont connector at the other.
- Old Style, consisting of:
- Fan with 1m leads ending in bare wires.
The new style is being phased in as a replacement, however some fans may still have the old style leads.