Difference between revisions of "E3D-v5 Documentation"

From E3D-Online
Jump to: navigation, search
This Wiki is not looked after anymore :( Please navigate to
e3d-online.dozuki.com
for up to date and improved documentation
(Engineering Drawings)
(Printer-Specific Assembly Instructions)
 
Line 19: Line 19:
 
== Printer-Specific Assembly Instructions ==
 
== Printer-Specific Assembly Instructions ==
  
[http://www.soliwiki.com/E3D_extruder Solidoodle] - Guide by HunterGreen on the Solidoodle Wiki
+
* [http://www.soliwiki.com/E3D_extruder Solidoodle] - Guide by HunterGreen on the Solidoodle Wiki
[http://forum.e3d-online.com/viewtopic.php?f=7&t=45 Velleman K8200] - Guide by Jake Carter on the E3D Forum
+
* [http://forum.e3d-online.com/viewtopic.php?f=7&t=45 Velleman K8200] - Guide by Jake Carter on the E3D Forum
 
 
  
 
== Download Links ==
 
== Download Links ==

Latest revision as of 16:24, 20 January 2015

E3D-v5 Spares Store

Spares for your E3D-v5 are available through the E3D-v5 Category on our website.

Generic Assembly Instructions

E3D-v5 Direct

E3D-v5 Assembly Manual (Direct)

E3D-v5 Bowden

Follow firstly the instructions for the v5 Direct E3D-v5 Assembly Manual (Direct)

Then follow the bowden-specific instructions E3D-v5 Assembly Manual (Bowden)

Video Guide

Also available is a video assembly guide by Tom Sanladerer. 3D printing guides - Assembling the E3D v5 hotend


Printer-Specific Assembly Instructions

Download Links

STL for v5 Fan Duct Thingiverse (114036)


Engineering Drawings

E3D-v5 Heat Sink Drawing
E3D-v5 Heat Break Drawing
E3D-v5 Rev 3 Heater Block Drawing
E3D-v5 Rev 5 Heater Block Drawing