E3D-v5 Documentation

From E3D-Online
Revision as of 16:20, 20 January 2015 by Joshuarowley42 (talk | contribs) (Created page with "== E3D-v5 Spares Store == Spares for your E3D-v5 are available through the [http://e3d-online.com/E3D-v5 E3D-v5 Category] on our website. == Generic Assembly Instructions =...")

(diff) ← Older revision | Latest revision (diff) | Newer revision → (diff)
Jump to: navigation, search
This Wiki is not looked after anymore :( Please navigate to
e3d-online.dozuki.com
for up to date and improved documentation

E3D-v5 Spares Store

Spares for your E3D-v5 are available through the E3D-v5 Category on our website.

Generic Assembly Instructions

E3D-v5 Direct

E3D-v5 Assembly Manual (Direct)

E3D-v5 Bowden

Follow firstly the instructions for the v5 Direct E3D-v5 Assembly Manual (Direct)

Then follow the bowden-specific instructions E3D-v5 Assembly Manual (Bowden)

Video Guide

Also available is a video assembly guide by Tom Sanladerer. 3D printing guides - Assembling the E3D v5 hotend


Printer-Specific Assembly Instructions

Solidoodle - Guide by HunterGreen on the Solidoodle Wiki Velleman K8200 - Guide by Jake Carter on the E3D Forum


Download Links

STL for v5 Fan Duct Thingiverse (114036)


Engineering Drawings

File:DRAWING-V5-SINK.png
E3D-v5 Heat Sink Drawing
File:DRAWING-V5-BREAK.png
E3D-v5 Heat Break Drawing
File:DRAWING-V5-BLOCK rev3.png
E3D-v5 Rev 3 Heater Block Drawing
File:DRAWING-V5-BLOCK rev5.png
E3D-v5 Rev 5 Heater Block Drawing