E3D-v5 Documentation

From E3D-Online
Revision as of 16:24, 20 January 2015 by Joshuarowley42 (talk | contribs) (Printer-Specific Assembly Instructions)

(diff) ← Older revision | Latest revision (diff) | Newer revision → (diff)
Jump to: navigation, search
This Wiki is not looked after anymore :( Please navigate to
for up to date and improved documentation

E3D-v5 Spares Store

Spares for your E3D-v5 are available through the E3D-v5 Category on our website.

Generic Assembly Instructions

E3D-v5 Direct

E3D-v5 Assembly Manual (Direct)

E3D-v5 Bowden

Follow firstly the instructions for the v5 Direct E3D-v5 Assembly Manual (Direct)

Then follow the bowden-specific instructions E3D-v5 Assembly Manual (Bowden)

Video Guide

Also available is a video assembly guide by Tom Sanladerer. 3D printing guides - Assembling the E3D v5 hotend

Printer-Specific Assembly Instructions

Download Links

STL for v5 Fan Duct Thingiverse (114036)

Engineering Drawings

E3D-v5 Heat Sink Drawing
E3D-v5 Heat Break Drawing
E3D-v5 Rev 3 Heater Block Drawing
E3D-v5 Rev 5 Heater Block Drawing