E3D-v6 (Volcano) Documentation
From E3D-Online
This Wiki is not looked after anymore :( Please navigate to
e3d-online.dozuki.com
for up to date and improved documentation
e3d-online.dozuki.com
for up to date and improved documentation
Contents
Assembly Guidelines
Generic Assembly Guidelines
See E3D-v6_Assembly#HotSide for the assembly instructions. Assembly of Volcano is essentially identical to that of the standard E3D-v6 block, the only notable difference is that there are two heater clamping screws, and the heater wires should exit through the top of the block. Please follow the instructions to the letter!
Nozzle Identification
# of Marks | Nozzle Size |
---|---|
0 | 0.60mm |
1 | 0.80mm |
2 | 1.00mm |
3 | 1.20mm |