Difference between revisions of "FleXD"

From E3D-Online
Jump to: navigation, search
This Wiki is not looked after anymore :( Please navigate to
e3d-online.dozuki.com
for up to date and improved documentation
(Created page with "FleXD is a TPU with hardness Shore 93A. It's bouncy yet firm, suitable for all kinds of fun applications as well as for printing gaskets, tyres, seals, and ice trays. Spool we...")
 
Line 1: Line 1:
 +
<div class="warning">This Wiki is not looked after anymore :( Please navigate to <br />[https://e3d-online.dozuki.com/ www.e3d-online.dozuki.com] <br />for up to date and improved documentation</div>
 
FleXD is a TPU with hardness Shore 93A. It's bouncy yet firm, suitable for all kinds of fun applications as well as for printing gaskets, tyres, seals, and ice trays. Spool weight: 500g
 
FleXD is a TPU with hardness Shore 93A. It's bouncy yet firm, suitable for all kinds of fun applications as well as for printing gaskets, tyres, seals, and ice trays. Spool weight: 500g
  

Revision as of 14:12, 27 October 2017

This Wiki is not looked after anymore :( Please navigate to
www.e3d-online.dozuki.com
for up to date and improved documentation

FleXD is a TPU with hardness Shore 93A. It's bouncy yet firm, suitable for all kinds of fun applications as well as for printing gaskets, tyres, seals, and ice trays. Spool weight: 500g

Print Guidelines

  • Bed Temp | 80°C+
  • Brass Nozzle Temp | 220°C
  • Bed Adhesion | Glue stick on glass, no additional adhesive needed on PEI sheeting or blue tape.