FleXD

From E3D-Online
Revision as of 13:29, 17 November 2017 by Joshuarowley42 (talk | contribs) (Reverted edits by Ryansmithe3d (talk) to last revision by Clare)

(diff) ← Older revision | Latest revision (diff) | Newer revision → (diff)
Jump to: navigation, search
This Wiki is not looked after anymore :( Please navigate to
e3d-online.dozuki.com
for up to date and improved documentation

FleXD is a TPU with hardness Shore 93A. It's bouncy yet firm, suitable for all kinds of fun applications as well as for printing gaskets, tyres, seals, and ice trays. Spool weight: 500g

Print Guidelines

  • Bed Temp | 80°C+
  • Brass Nozzle Temp | 220°C
  • Bed Adhesion | Glue stick on glass, no additional adhesive needed on PEI sheeting or blue tape.