Difference between revisions of "Kraken Documentation"

From E3D-Online
Jump to: navigation, search
This Wiki is not looked after anymore :( Please navigate to
e3d-online.dozuki.com
for up to date and improved documentation
(Created page with " == Assembly Guidelines == === Generic Assembly Guidelines === See Kraken Assembly for the assembly instructions. Please follow them to the letter! === Printer Specific...")
 
m (Reverted edits by Ryansmithe3d (talk) to last revision by Adubaret)
 
(4 intermediate revisions by 3 users not shown)
Line 6: Line 6:
 
=== Printer Specific Guides ===
 
=== Printer Specific Guides ===
 
There is £25 store credit available for any guide produced which conforms to E3D's [[Acceptable Guide Standard]].
 
There is £25 store credit available for any guide produced which conforms to E3D's [[Acceptable Guide Standard]].
* [[ Makibox ]]
+
* [[ Kraken on Makibox ]]
* [[ Mendel 90 ]]
+
* [[ Kraken on Mendel 90 ]]
* [[ Rostock Max ]]
+
* [[ Kraken on Rostock Max ]]
* [[ Solidoodle ]]
+
* [[ Kraken on Solidoodle ]]
* [[ Ultimaker 1 ]]
+
* [[ Kraken on Ultimaker 1 ]]
* [[ Ultimaker 2 ]]
+
* [[ Kraken on Ultimaker 2 ]]
* [[ Velleman k8200 ]]
+
* [[ Kraken on Velleman k8200 ]]
 
* ....
 
* ....
 
  
 
== Engineering Drawings ==
 
== Engineering Drawings ==
==== 1.75mm Universal ====
+
==== 1.75mm Only ====
[[File:DRAWING-KRAKEN-BLOCK.png|thumb|upright=1.35|center|E3D Kraken Cooler Block]]
+
[[File:KR1-COOLER-Rev1-1.png|thumb|upright=1.35|center|E3D Kraken Cooler Block]]
[[File:DRAWING-KRAKEN-BREAK.png|thumb|upright=1.35|center|E3D Kraken Heat Break]]
+
[[File:KR1-BREAK-Rev5-1.png|thumb|upright=1.35|center|E3D Kraken Heat Break]]
 +
[[File:KR1-ASSEMBLY_V6_CARTRIDGE-1.png|thumb|upright=1.35|center|E3D Kraken V6 Assembly]]
 +
[[File:KR1-ASSEMBLY_V6_CARTRIDGE_MKII-1.png|thumb|upright=1.35|center|E3D Kraken V6 Assembly]]

Latest revision as of 13:29, 17 November 2017

Assembly Guidelines

Generic Assembly Guidelines

See Kraken Assembly for the assembly instructions. Please follow them to the letter!

Printer Specific Guides

There is £25 store credit available for any guide produced which conforms to E3D's Acceptable Guide Standard.

Engineering Drawings

1.75mm Only

E3D Kraken Cooler Block
E3D Kraken Heat Break
E3D Kraken V6 Assembly
E3D Kraken V6 Assembly