Difference between revisions of "Kraken Documentation"

From E3D-Online
Jump to: navigation, search
This Wiki is not looked after anymore :( Please navigate to
e3d-online.dozuki.com
for up to date and improved documentation
(Created page with " == Assembly Guidelines == === Generic Assembly Guidelines === See Kraken Assembly for the assembly instructions. Please follow them to the letter! === Printer Specific...")
 
(1.75mm Universal)
Line 17: Line 17:
  
 
== Engineering Drawings ==
 
== Engineering Drawings ==
==== 1.75mm Universal ====
+
==== 1.75mm Only ====
 
[[File:DRAWING-KRAKEN-BLOCK.png|thumb|upright=1.35|center|E3D Kraken Cooler Block]]
 
[[File:DRAWING-KRAKEN-BLOCK.png|thumb|upright=1.35|center|E3D Kraken Cooler Block]]
 
[[File:DRAWING-KRAKEN-BREAK.png|thumb|upright=1.35|center|E3D Kraken Heat Break]]
 
[[File:DRAWING-KRAKEN-BREAK.png|thumb|upright=1.35|center|E3D Kraken Heat Break]]

Revision as of 15:01, 19 January 2015

Assembly Guidelines

Generic Assembly Guidelines

See Kraken Assembly for the assembly instructions. Please follow them to the letter!

Printer Specific Guides

There is £25 store credit available for any guide produced which conforms to E3D's Acceptable Guide Standard.


Engineering Drawings

1.75mm Only

E3D Kraken Cooler Block
E3D Kraken Heat Break