Lulzbot SOMEstruder Documentation

From E3D-Online
Revision as of 15:15, 3 March 2017 by Adubaret (talk | contribs)

Jump to: navigation, search
This Wiki is not looked after anymore :( Please navigate to
e3d-online.dozuki.com
for up to date and improved documentation

THIS IS A WORK IN PROGRESS

This hotend is designed as a standard hotend to be dropped in and replace the MOARstruder block to allow "standard" nozzles sizes and lower speeds to be achieved. It is fully compatile with the range of Hexagon nozzles.

Heater Block

File:PR-AO-SOMESTRUDER-BLOCK.pdf

Retention Plate

File:PR-AO-SOMESTRUDER.pdf