Lulzbot SOMEstruder Documentation

From E3D-Online
Revision as of 13:29, 17 November 2017 by Joshuarowley42 (talk | contribs) (Reverted edits by Ryansmithe3d (talk) to last revision by Adubaret)

(diff) ← Older revision | Latest revision (diff) | Newer revision → (diff)
Jump to: navigation, search
This Wiki is not looked after anymore :( Please navigate to
e3d-online.dozuki.com
for up to date and improved documentation

THIS IS A WORK IN PROGRESS

This hotend is designed as a standard hotend to be dropped in and replace the MOARstruder block to allow "standard" nozzles sizes and lower speeds to be achieved. It is fully compatile with the range of Hexagon nozzles.

Heater Block

File:PR-AO-SOMESTRUDER-BLOCK.pdf

Retention Plate

File:PR-AO-SOMESTRUDER.pdf