V6 0.15mm High Precision Nozzles

From E3D-Online
Revision as of 11:56, 7 November 2016 by Adubaret (talk | contribs) (Introduction)

Jump to: navigation, search
This Wiki is not looked after anymore :( Please navigate to
e3d-online.dozuki.com
for up to date and improved documentation

WARNING: This nozzle has been engineered to be as user friendly as possible, however, in order to obtain the best prints possible, here are a few recommended settings.

Printer settings

Extruder

  • Nozzle Diameter: 0.15mm
  • Extrusion Multiplier: 1.00
  • Extrusion Width: 0.18mm
  • Layer Height: 0.0800mm
  • Retraction Distance: 1.00mm
  • Extra Retraction Distance: 0.00mm
  • Retraction Vertical Lift: 0.00mm (important to reduce vibration and vertical stringing)
  • Retraction Speed: 30.0mm.s-1
  • No Coasting
  • No Wiping

Layers

  • 3 layers top, bottom and sides printed inside out
  • First Layer Height: 160%
  • First Layer Width: 120%
  • First Layer Speed: 50%

Infill

  • Triangular Infill (0, 60, -60)
  • Interior Fill Percentage: 25%
  • Outline Overlap: 15%
  • Infill Extrusion Width: 100%
  • Minimum Infill Length: 5.00mm (can be less due to the good bridging capabilities)
  • Print sparse infill every layer

Support (if required)

  • Support Infill Percentage: 30%
  • No extra inflation distance
  • No dense support layers
  • Support every layer
  • Horizontal Offset From Part: 0.30mm
  • Upper Vertical Separation: 1 layer
  • Lower Vertical Separation: 1 layer
  • Max Overhang: 45 deg

Speeds

  • Default Printing Speed: 30.0mm.s-1
  • Outline Underspeed: 75%
  • Solid Infill Underspeed: 80%
  • Support Structure Underspeed: 80%
  • X/Y Axis Speed: 80mm.s-1
  • Z Axis Speed: 16.7mm.s-1